NFPA Standards For Lifting Airbags

Lifting airbags are extremely important tools used in rescue operations. Whether they are lifting a vehicle off of a trapped occupant or helping to stabilize a building that is collapsing, these tools are put through extreme pressure and stress. When lives are on the line, these devices cannot fail. That’s why it is essential for fire departments to understand and follow the NFPA standards for lifting bags. This guide will go over how the NFPA airbag guidelines work, and how you can make sure your department has all it needs to have 100% confidence in your gear.

What Exactly Are Rescue Airbags?

Rescue airbags, also called high-pressure lifting bags, are inflatable tools used to lift, move, or stabilize heavy objects during rescue operations. Most of the time, these systems run on compressed air and come in different sizes and pressure ratings, with 12 bar (174 psi) or 15 bar (218 psi) being the most common.

There are many companies that make these tools, but not all of them are made the same way. The quality of the construction and the materials can be different, as can the needs for inspection and maintenance. That’s where the NFPA standards come in.

What Are The NFPA Guidelines for Lifting Bags?

There are two main guidelines for lifting airbags. The first is NFPA 1936, which covers many of the performance requirements for powered rescue tools. It was made to promote consistent product quality across the industry, and to make sure that all rescue equipment meets minimum requirements for performance and safety. The second guideline is NFPA 1937, which talks about more of the care and maintenance requirements. Here are some of the main points that NFPA 1936 & NFPA 1937 cover for lifting airbags:

  • According to NFPA 1936, all lifting bags that are 15 years old or older must be removed from service and destroyed. This is due to the natural degradation of rubber, the material used in all rescue lifting bag systems, which has a safe service life of no more than 15 years. However, actual lifespan can be much shorter depending on use and environmental exposure.
  • Airbags Must Have Clear Pressure Ratings: Over-inflating lifting airbags is an extremely serious situation, so airbags must have the maximum pressure limits permanently marked on them.
  • Airbags Must Be Tested At Least Annually: Lifting airbags are required to be inspected at least every year, but it is a better practice to do it after every use. It only takes a slight rip or puncture to ruin the integrity of the equipment, so the more frequently it can be tested, the better. These tests include inflating the bag and inspecting for leaks while under pressure.
  • Requirements For Training And Keeping Documents: NFPA recommends that departments maintain documentation of inspections and repairs. Teams should also receive regular training on proper use and inspection procedures.
  • Retirement And Disposal Criteria: If a bag is beyond repair or is found to have defects that compromise safety, it must be permanently removed from service. Parts that cannot be replaced or repaired must be retired.

NFPA 1937 covers many of the same points that NFPA 1936 does, but focuses more on maintenance and inspection, whereas NFPA 1936 focuses heavily on rules about design and performance.

Why Do THE NFPA Guidelines for Lifting Airbags Matter?

Rescue airbags are relied upon to save lives. These tools might sit for days or weeks until they are needed, but when the time comes there is no room for failure. Recue departments that prioritize maintenance and care that follows NFPA standards can be certain that their airbags will be able to do their job when duty calls, and can be confident that they have what it takes to save lives.

Howell Rescue Provides Departments With Reliable Lifting Airbags And More

Howell Rescue is partnered with SAVA rescue airbags, and is their master distributor in the United States. SAVA airbags are manufactured out of Kevlar and are much stronger than traditional steel-braided products (check out our article comparing Kevlar lifting airbags and steel-braided lifting airbags). These products give crews precise control over inflation, and can be filled to whatever pressure is needed to free the occupant.

Howell Recuse is also committed to making sure that fire and rescue teams have the training needed to use these tools effectively, and reliable service to keep this equipment in top shape. We want to do whatever we can to make sure that rescue crews have everything they need to save lives.

For sales, service, and training that keeps in line with NFPA guidelines and makes a real difference for numerous departments around the country, contact Howell Rescue Systems. Speak with our team for a free quote, and see how we can help you save lives.